This silver mine preserves two features of bygone practice. One is the reversible waterwheel of the ore-hoist, which originally was installed in 1565 and currently dates back to 1824. The present wheel is 9 meters in diameter and reaches a depth of 700 meters.
Minerals Extraction & Refining
YearAdded:
Image Credit:
Public Domain (Author's Choice)
Image Caption:
Samson Mine Reversible Waterwheel & Man Engine
Era_date_from:
1824
1987
The first authenticated discovery of gold in the U.S. occurred on the Cabarrus County farm of John Reed in 1799, sparking the nation's first gold rush. During its peak years, more than a million dollars of gold was recovered a year, making North Carolina a leader in gold production until 1848. This mill, built by the Mecklenburg Iron Works of Charlotte, North Carolina, is original except for the timber work. Two groups of five 750-pound stamps with 5- to 7-inch lift, rose and fell thirty-five times a minute to yield a finely crushed ore.
YearAdded:
Image Credit:
Image Caption:
Manufacturer’s identification plaque
Era_date_from:
1895
1983
The first authenticated discovery of gold in the U.S. occurred on the Cabarrus County farm of John Reed in 1799, sparking the nation's first gold rush. During its peak years, more than a million dollars of gold was recovered a year, making North Carolina a leader in gold production until 1848. This mill, built by the Mecklenburg Iron Works of Charlotte, North Carolina, is original except for the timber work. Two groups of five 750-pound stamps with 5- to 7-inch lift, rose and fell thirty-five times a minute to yield a finely crushed ore.
YearAdded:
Image Credit:
Photo Courtesy of North Carolina Department of Cultural Resources.
Image Caption:
The Stamp Mill at the Reed Gold Mine in Midland, NC.
Era_date_from:
1895
1983
This mechanism allowed the manual closing of a well, saved lives and prevented surface oil accumulation at drilling sites, quickly becoming an industry standard. In the early days of oilfield operations, there was no way to control the underground pressures encountered during drilling. When an oil or gas reservoir was tapped, wells were allowed to "blow out" until pressure was reduced sufficiently to allow capping. Many inventors attempted to develop a device to control such blowouts. In 1922, oil wildcatter James Smither Abercrombie (1891-1975) and machinist Harry S.
YearAdded:
Image Credit:
Original Image: Flickr/Ed Schipul (CC BY-SA 2.0)
Image Caption:
A modern Blowout Preventer (BOP)
Era_date_from:
1922
2003
The economic situation in the whale oil business (for lighting), coupled with the increased demand for lubricants, stimulated growth in the U.S. petroleum industry. The drilling of the heavy, sulfurous, and asphaltic California crude began in the 1870s at the Pico Canyon area, using the apparatus and techniques from Titusville, Pennsylvania, developments.
YearAdded:
Image Credit:
Courtesy Flickr/Konrad Summers (CC BY-SA 2.0)
Image Caption:
Pioneer Oil Refinery California Star Oil Works
Era_date_from:
1876
1975
This furnace was the focal point of a pre-Industrial Revolution industry town, one of hundreds of furnaces that thrived and failed in the 19th century. The Maryland Iron Company (incorporated 1828) built this furnace along the Nassawango Creek roughly four miles northwest of the Pocomoke River to produce pig iron by the cold-blast process. In 1836-37 the furnace changed ownership several times, until Thomas Spence of Worcester County purchased it and began producing pig iron at a rate of 700 tons a year. Spence is credited with the installation of the hot-blast stove.
YearAdded:
Image Credit:
Public Domain (National Park Service)
Image Caption:
Nassawango Iron Furnace
Era_date_from:
1828
1991
Prior to 1909 the traditional fishtail bit scraped the rock and quickly dulled in service. The Hughes two-cone bit's revolutionary rolling action crushed hard-rock formations with twin cone-shaped, hardened steel bits, each with 166 cutting edges, revolving on bronze bearings shaped to provide a large surface with reduced friction.
YearAdded:
Image Credit:
Courtesy ASME
Image Caption:
Hughes Two-Cone Drill Bit
Era_date_from:
1909
2009
The Hanford B-Reactor was the first plutonium production reactor to be placed in operation. Its success made possible the subsequent development of atomic energy. The research work, engineering, and planning required to make the reactor operate is one of our most advanced achievements. Much of the reactor core, cooling system, shielding, and auxiliary systems were designed by mechanical engineers.
YearAdded:
Image Credit:
Courtesy Flickr/David Lee (CC BY-SA 2.0)
Image Caption:
Hanford B Reactor
Era_date_from:
1944
1976
The drilling of this oil well marks the modern phase of the petroleum industry. A series of revolutionary technological changes, unforeseen even by the most prophetic, followed. Drake demonstrated practical oil recovery by applying salt-well drilling techniques, including the use of the derrick, and invented the modern method of driving iron pipe.
While excavation for oil dates back to the 1500s in this area, its uses were not explored until the 1800s. It was first sold as a curative potion and then developed into a illuminant by the 1850s.
YearAdded:
Image Credit:
Courtesy Wikipedia/Zamoose (CC BY-SA 2.5)
Image Caption:
Drake Oil Well
Era_date_from:
1859
1979
When erected by Peter Grubb to smelt the rich iron ore of the nearby Cornwall ore banks, this stone-built blast furnace was typical for its time, producing about 20 tons of pig-iron and cast-iron products a week. A major reconstruction in 1856 to 1857 produced important changes: the furnace itself was enlarged; the blast-air bellows were replaced by a pair of wooden cylinder "blowing tubs"; the waterwheel that had powered them was replaced by a 20-horsepower steam engine; and a pair of waste-heat boilers to supply the engine was built into the open stack of the furnace.
YearAdded:
Image Credit:
Courtesy Wikipedia/Wherring (CC BY-SA 3.0)
Image Caption:
Cornwall Iron Furnace
Era_date_from:
1742
1985
Innovations
This floating dredge is one of the last mammoth gold dredges in the Fairbanks Mining District that traveled an ancient stream bed, thawing the ground ahead of it and scooping up the gravel. During 32 years of operation, a fortune in gold washed through its sluices. Ladder dredges came to Alaska…
Read More
The Saugus Ironworks, the first commercial ironworks in North America, was an impressive technological achievement for an early colony. The same basic processes are used today: reducing iron oxide with carbon to produce metallic iron that can be cast in a mold, producing wrought iron by puddling…
Read More
This is one of the three original 60-ton vessels by which the basic oxygen process (BOP) of steel making was introduced into this country from Austria, where it was invented. It heralded the first new technology in fifty years to become the basis of a major process for steel production throughout… Read More
When built in 1962, this shovel was the second largest in the world. It was used for the removal of overburden in the surface mining of thin coal seams. In its lifetime, it recovered nine million tons of bituminous coal from depths of 20 to 50 feet for local electric power generation. Standing 160-… Read More
This compressor was a product of the combined technology and design heritage of both the C. & G. Cooper Company of Mount Vernon and the Bessemer Gas Engine Company of Pennsylvania, which had merged in 1929. Ralph L. Boyer, the chief architect of the GMV, worked for Cooper-Bessemer from 1926…
Read More
When erected by Peter Grubb to smelt the rich iron ore of the nearby Cornwall ore banks, this stone-built blast furnace was typical for its time, producing about 20 tons of pig-iron and cast-iron products a week. A major reconstruction in 1856 to 1857 produced important changes: the furnace itself… Read More
The drilling of this oil well marks the modern phase of the petroleum industry. A series of revolutionary technological changes, unforeseen even by the most prophetic, followed. Drake demonstrated practical oil recovery by applying salt-well drilling techniques, including the use of the derrick,… Read More
The Hanford B-Reactor was the first plutonium production reactor to be placed in operation. Its success made possible the subsequent development of atomic energy. The research work, engineering, and planning required to make the reactor operate is one of our most advanced achievements. Much of…
Read More
Prior to 1909 the traditional fishtail bit scraped the rock and quickly dulled in service. The Hughes two-cone bit's revolutionary rolling action crushed hard-rock formations with twin cone-shaped, hardened steel bits, each with 166 cutting edges, revolving on bronze bearings shaped to provide a…
Read More
This furnace was the focal point of a pre-Industrial Revolution industry town, one of hundreds of furnaces that thrived and failed in the 19th century. The Maryland Iron Company (incorporated 1828) built this furnace along the Nassawango Creek roughly four miles northwest of the Pocomoke River to… Read More
The economic situation in the whale oil business (for lighting), coupled with the increased demand for lubricants, stimulated growth in the U.S. petroleum industry. The drilling of the heavy, sulfurous, and asphaltic California crude began in the 1870s at the Pico Canyon area, using the…
Read More
This mechanism allowed the manual closing of a well, saved lives and prevented surface oil accumulation at drilling sites, quickly becoming an industry standard. In the early days of oilfield operations, there was no way to control the underground pressures encountered during drilling. When an oil… Read More
The first authenticated discovery of gold in the U.S. occurred on the Cabarrus County farm of John Reed in 1799, sparking the nation's first gold rush. During its peak years, more than a million dollars of gold was recovered a year, making North Carolina a leader in gold production until 1848.…
Read More
The first authenticated discovery of gold in the U.S. occurred on the Cabarrus County farm of John Reed in 1799, sparking the nation's first gold rush. During its peak years, more than a million dollars of gold was recovered a year, making North Carolina a leader in gold production until 1848.…
Read More
This silver mine preserves two features of bygone practice. One is the reversible waterwheel of the ore-hoist, which originally was installed in 1565 and currently dates back to 1824. The present wheel is 9 meters in diameter and reaches a depth of 700 meters.
Second, the man engine of…
Read More