This is one of the three original 60-ton vessels by which the basic oxygen process (BOP) of steel making was introduced into this country from Austria, where it was invented. It heralded the first new technology in fifty years to become the basis of a major process for steel production throughout the world. In this process, a water-cooled lance injected a jet of high-purity oxygen into the bath of molten iron. Various chemical reactions produced a quality low-nitrogen steel at a ton-per-hour rate nearly three times that of the open hearth furnace.
ASME
Term Image
YearAdded:
Image Credit:
Courtesy ASME
Image Caption:
Basic-Oxygen Steel Making Vessel
Era_date_from:
1955
1985
The Atlas E-2 Space Booster, or launch vehicle, is a modified intercontinental ballistic missile developed by the Convair Division of General Dynamics and the U.S. Air Force. The basic concept of the Atlas system was proven in its first flight on June 11, 1957, followed over the years by the launching more than five hundred vehicles including the Pioneer, Ranger, Mariner, and Surveyor. Many payloads were sent into orbit as detachable sections of Atlas missiles.
YearAdded:
Image Credit:
All 3 images are Public Domain
Image Caption:
A compilation of three successful launches vehicles in action. On the left is the Atlas-Centaur, the center is the Atlas-Agena, and the right is the SM-65A Atlas missile.
Era_date_from:
1957
1985
With a water table several feet below ground level, New Orleans faced a crisis after every heavy rainfall, not just through flooding but also through disease (yellow fever and malaria) caused by impure water. New Orleans was dependent on mechanical means for lifting water from its canals and sewage systems.
A. Baldwin Wood (1879-1956), a young assistant city engineer, designed and installed a system of large screw pumps (axial flow machines) to syphon water and accelerate drainage. By 1915 the Wood screw pump became the most advanced drainage pump in use.
YearAdded:
Image Credit:
Courtesy ASME
Image Caption:
This 14-foot tall Wood Screw Pump, constructed 1929, drained even more sewage/water/drainage than the 12-foot drains that preceded it
Era_date_from:
1914
1974
6225 Vectorspace Blvd Titusville State: FL Zip: 32780 Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-a-l/air-and-space-transportation/-162-apollo-space-command-module-%281968%29, http://nssdc.gsfc.nasa.gov/planetary/lunar/apollo14info.html Creator: North American Aviation
The Apollo was the vehicle that first transported humans to the moon and safely back to earth. Nine lunar flights were made between 1968 and 1972. The command module, built by North American Aviation (at the time of launch, North American Rockwell Corporation), accommodated three astronauts during the mission. It was the only portion of the Apollo spacecraft system designed to withstand the intense heat of atmospheric re-entry at 25,000 mph and complete the mission intact. This command module at Rockwell flew as Apollo 14 in 1971.
YearAdded:
Image Credit:
Courtesy Flickr/Chad Nordstrom (CC BY 2.0)
Image Caption:
The real Apollo Space Command Module on display at the Kennedy Space Center's Saturn V Building.
Era_date_from:
1968
1992
The Apollo lunar module (LM-13) was developed by the Grumman Aircraft Engineering Corp. (now Northrop Grumman). The LM's main functions were to carry two astronauts from lunar orbit to the moon's surface, and then return them to lunar orbit to rendezvous and dock with the Apollo command-service modules. On the surface, the LM served as a shelter and base of operations as the astronauts carried out their exploration and experiments. On July 20, 1969, the LM "Eagle" touched down on the moon, becoming the first piloted spacecraft to land on a celestial body other than Earth.
YearAdded:
Image Credit:
Courtesy Flickr/Michael Gray (CC BY-SA 2.0)
Image Caption:
The Apollo Lunar Module LM-13 on display in the Cradle of Aviation Museum
Era_date_from:
1972
2002
The "Alligator" amphibian tractor is the progenitor of all amphibian assault vehicles used since 1941, a pioneer venture both in its design and the materials used in its construction. Donald Roebling, a grandson of Colonel Washington Roebling (designer of the Brooklyn Bridge), built an amphibian tractor to rescue victims of Florida's devastating hurricanes (particularly those in 1926, 1928, and 1932 that hit southern Florida).
YearAdded:
Image Credit:
Public Domain (US Marine Corps)
Image Caption:
An Alligator Amphibian on the slope of a Landing Craft Tank, armed with machine guns
Era_date_from:
1940
1997
The idea of constructing a rotating boom for
hydromechanical tests at the Alden Hydraulic Laboratory
originated with Professor Charles Metcalf Allen, head of
the lab from 1896 to 1950. The original boom was designed
in 1908 by Professor Allen, assisted by two Worcester
Polytechnic Institute students.
Professor Allen needed a moving test stand for hydraulic
experiments and for rating current meters.
YearAdded:
Image Credit:
Courtesy ASME
Image Caption:
L.J. Hooper (left), Charles M. Allen (center) and Clyde W. Hubbard (right) sit together on the rotating boom.
Era_date_from:
1908
1982
The Ljungstrom air preheater is a regenerative heat exchanger, invented in the 1920s and soon used throughout the world. Dr. Fredrik Ljungstrom, then technical director at Aktiebolaget Ljunstrom Angturbin, invented it for preheating combustion air in boiler plants, but the use has expanded to include energy recovery in combination with the removal of oxides of sulfur and nitrogen.
YearAdded:
Image Credit:
Public Domain
Image Caption:
Ljungstrom Air Preheater
Era_date_from:
1920
1995
This 50,000-ton die-forging press is among the largest fabrication tools in the world. It was designed and built for the U.S. Air Force by the Mesta Machine Company of Pittsburgh, following the discovery of a 30,000-ton press used by the Germans in World War II (later acquired by the Soviet Union). By 1950, a Heavy Press Program was organized to establish a self-sustaining industrial base for a press capable of producing large forgings and extrusions for the United States. The 50,000-ton Mesta press was one of the first built under this program between 1952 and 1955.
YearAdded:
Image Credit:
Image Caption:
The true enormity of the ALCOA 50,000-ton Hydraulic Forging Press can be fully appreciated when put into comparison of the average-sized person (lower right and on the platform).
Era_date_from:
1954
1981
A majority of the buildings, used originally in steam locomotive repair and maintenance, are still intact, including the backshop (erecting shop), roundhouse, flue shop, paint shop, and parts storage buildings. The 37-stall roundhouse is one of the largest remaining roundhouses in North America still in continuous operation. The site contains other significant buildings including the car repair shed, yard office, oil house, sand house, and wheel balancing shed.
YearAdded:
Image Credit:
Courtesy ASME
Image Caption:
The Bob Julian Roundhouse, part of Southern Railway Spencer Shops
Era_date_from:
1896
2011
Innovations
