The Chamberlain is the only surviving bridge of the original five. The others were replaced as the river rose due to flood control dams put in place over time.
1994
YearAdded:
Image Credit:
Image Caption:
Members of the South Dakota Army National Guard’s 200th Engineer Company guide a raft on the Missouri River during a river crossing operation on June 11, 2016. The Chamberlain in the background is the only surviving bridge of the five. The others were replaced as the river expanded due to flood control dams.
Era_date_from:
1920
1994
The 367-80 is the prototype for most jet transports. Its success was due largely to its mechanical systems, including turbine engines with thrust reversers and noise suppressors, redundant hydraulic control systems, and an improved cabin-pressurization system. Honeycomb flap panels were introduced, along with a strong, lightweight structural design that controlled fatigue cracking. These led to several innovations in aircraft tooling and manufacturing techniques.
The Dash-80 was the first commercial airliner economical enough to take the US airline industry off subsidy.
YearAdded:
Image Credit:
Courtesy Wikipedia/Boeing Dreamscape (CC BY 2.0)
Image Caption:
Prototype of the Boeing 707 and most jet transport systems, the Boeing 367-80 established economic feasibility of commercial air travel.
Era_date_from:
1954
1994
Combining British financing, American engineering, and Canadian contracting, the White Pass and Yukon was the first major civil engineering project on the continent above the 60th degree of northern latitude. Completed in 27 months using only hand tools, black powder, and regional timber, the White Pass and Yukon rises almost 2,900 feet from sea level at the port of Skagway to the White Pass summit on the U.S.-Canada border in just 20 miles, accomplishing one of the steepest climbs of any railroad in the world.
YearAdded:
Image Credit:
Courtesy Wikipedia/Klanda (CC BY-SA 3.0)
Image Caption:
White Pass & Yukon Railroad
Era_date_from:
1900
1994
The bridge is 408 meters long and weighed approximately 1,500 metric tons when built. Originally supported by four columns, two more were added in later years to support the weight of heavier rail cars.
YearAdded:
Image Credit:
Courtesy Flickr/Rafael Retamal (CC BY-SA 2.0)
Image Caption:
Viaducto del Malleco
Era_date_from:
1890
1994
Conceived in the early years of World War II as a plan to bury four fuel containers horizontally in a hillside at the U.S. Navy facility at Pearl Harbor, Hawaii, the Red Hill Underground Fuel Storage Facility ultimately encompassed the design and construction of 20 vertical storage tanks - each large enough to contain a 20-story building - buried in the volcanic hillside and connected by tunnels to a harbor-side pumping station more than two-and-a-half miles away.
YearAdded:
Image Credit:
Courtesy Wikicommons/Leslie Nelson (CC BY-SA 4.0)
Image Caption:
Above-ground fuel storage tanks at Pearl Harbor prior to the construction of Red Hill.
Era_date_from:
1943
1994
This machine, designed by Alton S. Newell, efficiently reduced automobile bodies into scrap metal for recycling. A body was fed into the shredder at a controlled rate, and rotating hammers, driven by a 500-hp motor, shredded it into small pieces that were easily shipped. The process took about 10 minutes a car and used less energy than other shredding and crushing machines.
YearAdded:
Image Credit:
Image Caption:
Newell Shredder
Era_date_from:
1969
1994
Built during the 1930s, when Argentina's economy was the tenth strongest in the world, the Kavanagh Building was one of the world's first reinforced concrete skyscrapers and for many years remained the tallest building in South America. Commissioned by Corina Kavanagh and designed by architect Sanchez Lago y De la Torre, the 31-story modernist structure juxtaposes five volumes in a triangular, stair-like configuration that served for many years as a representative symbol of modern Buenos Aires.
YearAdded:
Image Credit:
Courtesy Flickr/Alex Proimos (CC BY 2.0)
Image Caption:
Kavanagh Building
Era_date_from:
1936
1994
This is one of several, similar inclines built in western Pennsylvania during the late 19th century. It was designed by Samuel Diescher (1839-1915) after the great flood of 1889, to provide an efficient means of transportation between Westmont and the Conemaugh Valley. (See also the Monogahela and Duquesne Inclines in Pittsburgh.)
YearAdded:
Image Credit:
Courtesy Flickr/Jeremy Tenenbaum (CC BY 2.0)
Image Caption:
Johnstown Incline
Era_date_from:
1891
1994
Although bottled carbonated beverages were popular by the 1880s, sealing the bottle was a constant problem. Most "stoppers" were of metal and intended for reuse. None sealed adequately, and contact with the cap often contaminated the drink.
In 1892 (Feb 2), William Painter (1838-1906) patented a cheap, single-use metallic cap, crimped over a lip formed on the bottle neck and lined with a thin cork wafer that both formed a leakproof seal and separated drink and metal.
YearAdded:
Image Credit:
Courtesy Wikipedia/KMJ (CC BY-SA 3.0)
Image Caption:
Crown Cork and Soda Filling Machine
Era_date_from:
1892
1994
Parker Dam State: CA Zip: Country: USA Website: http://www.asce.org/Project/Colorado-River-Aqueduct/ Creator: Weymouth, Frank E.
Stretching 242 miles from the Colorado River on the California-Arizona border to its final holding reservoir near Riverside, California, the Colorado River Aqueduct consists of more than 90 miles of tunnels, nearly 55 miles of cut-and-cover conduit, almost 30 miles of siphons, and five pumping stations. Supplying approximately 1.2 million acre-feet of water a year - more than a billion gallons a day - it helped make possible the phenomenal growth of Los Angeles, San Diego, and surrounding Southern California areas in the second half of the 20th century.
YearAdded:
Image Credit:
Courtesy Flickr/Chuck Coker (CC BY-ND 2.0)
Image Caption:
Colorado River Aqueduct sinks into a tunnel underneath California State Highway 62
Era_date_from:
1933
1994
Innovations
This collection of equipment—all of it maintained in operating condition and used for educational purposes—was established in 1987. It spans the period from the late 19th century to the 1940s, when steam was the prime motive force for most U.S. industries, including rail and marine…
Read More
Built by the Bay City Dredge Works of Bay City, Michigan, this dredge was used to construct a portion of US 41 called the Tamiami Trail, which connected Tampa with Miami through the Everglades and Big Cypress Swamp. The last remaining display of walking dredges (of some 145 walking machines), it…
Read More
This is the earliest known survivor of an integrated cotton ginning system widely used to process cotton from wagon to bale in a continuous operation. The gin machinery was designed and built in 1914 by the Lummus Cotton Gin Company. It can process seven bales per hour. Five gin stands, stick… Read More
The William H. Chandler Chemistry Laboratory was conceived and planned by William Henry Chandler (1841-1906), professor, chairman, librarian, and acting president of Lehigh University. Designed by Philadelphia architect Addison Hutton and erected between 1884 and 1885 at a cost of $200,000, the…
Read More
Clyde's mill is a rare survivor of a once-commonplace seasonal rural industry. Until recently a cider mill could be found in every community where apples were grown. In the fall, mills converted the fruit of the orchard into drink just as the grist mill converted the grain into flour.
Although… Read More
Stretching 242 miles from the Colorado River on the California-Arizona border to its final holding reservoir near Riverside, California, the Colorado River Aqueduct consists of more than 90 miles of tunnels, nearly 55 miles of cut-and-cover conduit, almost 30 miles of siphons, and five…
Although bottled carbonated beverages were popular by the 1880s, sealing the bottle was a constant problem. Most "stoppers" were of metal and intended for reuse. None sealed adequately, and contact with the cap often contaminated the drink.
In 1892 (Feb 2), William Painter (1838-1906) patented a… Read More
This is one of several, similar inclines built in western Pennsylvania during the late 19th century. It was designed by Samuel Diescher (1839-1915) after the great flood of 1889, to provide an efficient means of transportation between Westmont and the Conemaugh Valley. (See also the Monogahela…
Read More
Built during the 1930s, when Argentina's economy was the tenth strongest in the world, the Kavanagh Building was one of the world's first reinforced concrete skyscrapers and for many years remained the tallest building in South America. Commissioned by Corina Kavanagh and designed by architect…
Read More
This machine, designed by Alton S. Newell, efficiently reduced automobile bodies into scrap metal for recycling. A body was fed into the shredder at a controlled rate, and rotating hammers, driven by a 500-hp motor, shredded it into small pieces that were easily shipped. The process took about…
Read More
Conceived in the early years of World War II as a plan to bury four fuel containers horizontally in a hillside at the U.S. Navy facility at Pearl Harbor, Hawaii, the Red Hill Underground Fuel Storage Facility ultimately encompassed the design and construction of 20 vertical storage tanks - each…
Read More
The bridge is 408 meters long and weighed approximately 1,500 metric tons when built. Originally supported by four columns, two more were added in later years to support the weight of heavier rail cars.
In the late 19th century, the Malleco River represented the border between the…
Read More
Combining British financing, American engineering, and Canadian contracting, the White Pass and Yukon was the first major civil engineering project on the continent above the 60th degree of northern latitude. Completed in 27 months using only hand tools, black powder, and regional timber, the…
Read More
The 367-80 is the prototype for most jet transports. Its success was due largely to its mechanical systems, including turbine engines with thrust reversers and noise suppressors, redundant hydraulic control systems, and an improved cabin-pressurization system. Honeycomb flap panels were introduced… Read More
The Chamberlain is the only surviving bridge of the original five. The others were replaced as the river rose due to flood control dams put in place over time.
For its first 30 years of statehood, South Dakota was effectively two states. The Missouri river cut across the land forming a…
Read More