The economic situation in the whale oil business (for lighting), coupled with the increased demand for lubricants, stimulated growth in the U.S. petroleum industry. The drilling of the heavy, sulfurous, and asphaltic California crude began in the 1870s at the Pico Canyon area, using the apparatus and techniques from Titusville, Pennsylvania, developments.
Mechanical
YearAdded:
Image Credit:
Courtesy Flickr/Konrad Summers (CC BY-SA 2.0)
Image Caption:
Pioneer Oil Refinery California Star Oil Works
Era_date_from:
1876
1975
This was the first successful machine for mechanizing the identification and price marking of retail merchandise. At a single stroke of the operating handle, the machine formed a tag from a roll of stock, imprinted it with price and other information, formed a wire staple, and stapled the tag to the merchandise. This means for dispensing with handmade and written tags amounted to a minor revolution in the then rapidly expanding retail industry.
YearAdded:
Image Credit:
Courtesy ASME
Image Caption:
Pin-Ticketing Machine
Era_date_from:
1902
1990
605 Alpnach State: Zip: Country: Switzerland Website: https://www.asme.org/about-asme/who-we-are/engineering-history/landmarks/220-pilatusbahn, https://www.asme.org/getmedia/8c4b369d-83fd-4b9e-9248-b6d78b28628c/220-Pilatusbahn-1882.aspx Creator: Locher, Eduard , Locher Systems
The Pilatusbahn—the steepest rack railway in the world—has operated successfully since its opening in 1889 over a route of 4.62 kilometers (2.87 miles) between Alpnachstad on Lake Lucerne and Pilatus Kulm, rising 6,791 feet (2,070 meters) above sea level. This results in a gradient of 48%, or a rise of nearly one meter in two meters of run on the steepest sections of the line, which amounts to about a quarter of its length.
YearAdded:
Image Credit:
Courtesy Flickr/Stephane Dewarrat (CC BY-SA 2.0)
Image Caption:
Pilatusbahn
Era_date_from:
1882
2002
Opened July 9, 1904, this lift lock is the highest of its type in the world, transferring boats between two water levels in a single 19.8 m (65 ft.) lift. Designed in place of conventional locks, which would have lengthed the time considerably to transverse a gradual drop, this lift lock was a unique solution made feasible. It operates on a balance principle. Each boat chamber is supported by a ram, 2.28 m (7.5 ft.) In diameter. These move up and down inside water-filled cylinders connected by a pipe.
YearAdded:
Image Credit:
Courtesy Flickr/Mac Armstrong (CC BY-SA 2.0)
Image Caption:
Peterborough Hydraulic Canal Lift Lock
Era_date_from:
1904
1999
This is the oldest operating vessel with a diagonal, compound steam engine, with disc valve gear. Operating at a higher pressure than the oscillating-cylinder engines then used in lake steamers, this type of engine was more powerful and efficient, as well as smaller. The compound engine, built by Sulzer brothers of Winterthur, uses super-heated steam from the boilers in two stages-high and low pressure-before exhausting it into a condenser. The engine produces 650 horsepower, turning two paddle wheels.
YearAdded:
Image Credit:
Courtesy Wikicommons/Coronado1992 (CC BY-SA 3.0)
Image Caption:
Paddle Steamer Uri
Era_date_from:
1901
1998
The N.S. Savannah was the first nuclear-powered cargo-passenger ship, built by the New York Shipbuilding Corporation at Camden, New Jersey. The 74 maximum-power thermal megawatt pressurized-water reactor was supplied by the Babcock & Wilcox Company. Nearly 600 feet long with 22,000-tons displacement, the ship at top speed surged along at 24 knots, with more than 22,300 shaft horsepower to a single propeller. A joint venture by the U.S. Maritime Administration and the Atomic Energy Commission to the design of George G. Sharp Inc.
YearAdded:
Image Credit:
Public Domain (U.S. Government)
Image Caption:
NS Savannah
Era_date_from:
1962
1983
This machine, designed by Alton S. Newell, efficiently reduced automobile bodies into scrap metal for recycling. A body was fed into the shredder at a controlled rate, and rotating hammers, driven by a 500-hp motor, shredded it into small pieces that were easily shipped. The process took about 10 minutes a car and used less energy than other shredding and crushing machines.
YearAdded:
Image Credit:
Image Caption:
Newell Shredder
Era_date_from:
1969
1994
This furnace was the focal point of a pre-Industrial Revolution industry town, one of hundreds of furnaces that thrived and failed in the 19th century. The Maryland Iron Company (incorporated 1828) built this furnace along the Nassawango Creek roughly four miles northwest of the Pocomoke River to produce pig iron by the cold-blast process. In 1836-37 the furnace changed ownership several times, until Thomas Spence of Worcester County purchased it and began producing pig iron at a rate of 700 tons a year. Spence is credited with the installation of the hot-blast stove.
YearAdded:
Image Credit:
Public Domain (National Park Service)
Image Caption:
Nassawango Iron Furnace
Era_date_from:
1828
1991
This wind tunnel complex was developed by the National Advisory Committee for Aeronautics (NASA's predecessor) to serve the emerging need for supersonic research and development following World War II. The three-testing-section configuration covers Mach number .03-3.5 and utilizes a single common drive and two compressors.
YearAdded:
Image Credit:
Public Domain (NASA)
Image Caption:
NASA Ames Unitary Plan Wind Tunnel
Era_date_from:
1956
1996
The increased light-grasp of this telescope made possible many notable advances in structural cosmology between 1924 and 1930, which have revised our ideas about the universe. One of these advances was that spiral nebulae are galactic units like our own; another was the idea of an expanding universe. George Ellery Hale began planning this project in 1906; Francis G. Pease was the chief designer and mechanical engineer. The telescope's mirror support and the use of mercury flotation to reduce the friction are among its outstanding mechanical engineering features.
YearAdded:
Image Credit:
Courtesy Flickr/Bruce Irving (CC BY 2.0)
Image Caption:
Mount Wilson Observatory, 100-inch Hooker Telescope
Era_date_from:
1918
1981
Innovations
Prior to 1909 the traditional fishtail bit scraped the rock and quickly dulled in service. The Hughes two-cone bit's revolutionary rolling action crushed hard-rock formations with twin cone-shaped, hardened steel bits, each with 166 cutting edges, revolving on bronze bearings shaped to provide a…
Read More
In operation since 1944, the Icing Research Tunnel is the oldest and largest refrigerated icing wind tunnel in the world. Technology developed there enables aircraft to fly safely through icing clouds. Two firsts include the unique heat exchanger and the spray system that simulates a natural…
Read More
Plans to build a rapid transit system in New York were first made in 1831. By 1868 the first elevated railway was erected. As the "El" became crowded, construction of an underground railway was proposed. Ground was broken on March 24, 1900. The original subway, which took opened October 27, 1904,… Read More
This facility was typical of others in the country that made small spherical lead shot for the fowling pieces of frontier settlers. Smelted lead from the nearby Austinville mines was melted at the top of the tower and poured through a sizing sieve to produce small droplets. Surface tension caused… Read More
The Jake Brake permits large trucks to descend long, steep grades at a controlled speed. It was the first practical mechanism for altering on demand the valve timing on a truck diesel engine, thereby converting the engine to a power absorbing machine. The modified engine can continue to power the… Read More
Although not the first four-wheel-drive vehicle or the first designed for rough, multipurpose field use, the Jeep MB was built as an unusual combination of these and other features of modern vehicle design in the World War II era.
The prototype four-cylinder "Quad" was designed in 1940-…
Read More
The oscillating steam engine, built by John Penn & Sons, is located aboard the famed paddle steamer Diesbar. Diesbar is the second oldest of a fleet of nine paddle steamers in Dresden. What makes the Diesbar unique is its coal fueled engine and single deck design. The John Penn and Sons…
Read More
This is one of several, similar inclines built in western Pennsylvania during the late 19th century. It was designed by Samuel Diescher (1839-1915) after the great flood of 1889, to provide an efficient means of transportation between Westmont and the Conemaugh Valley. (See also the Monogahela…
Read More
This ironworks exemplified the adaptability required for industrial survival in a dynamic technical environment. It was a major western producer of mechanical equipment used in mining (especially large hydraulic machines), ship propulsion, irrigation, power generation, optical telescope mounts,…
Read More
This Kaplan turbine is one of the first three machines to be put into service in the United States. Named for its Austrian inventor, Viktor Kaplan (1876-1934), the turbine was an outstanding innovation, operating with a high, nearly constant efficiency over a wide load range. The machine was built… Read More
This is one of the earliest US foundry-machine shops remaining in operation and one of the few water powered. It was founded by Samuel N. Knight (1838-1913) to manufacture machinery for the gold mines of the …
Read More
The La Esperanza sugar mill steam engine is one of the few remaining American links to the pioneer beam engines of the English inventors Thomas Newcomen (1712) and James Watt (1769). The engine was built in 1861 in Cold Spring, New York, by the West Point Foundry. The general arrangement and…
Read More
This machine is an unusual triple-expansion, three-crank rocker engine, which in its day was a high-capacity unit providing outstanding performance for the Boston Water Works Corporation. Designed by Erasmus Darwin Leavitt, Jr. (1836-1916), Engine No. 3 was installed in 1894 to a high-service…
Read More
This steam crawler-tractor emancipated horses from the killing work of hauling trains of sleds over iced roads in the winter woods of the United States and Canada.
Designed, patented (1901), and built by Alvin C. Lombard (1856-1937) of Waterville, Maine, eighty-three "Lombards" were the first… Read More
At the mountain where the Civil War's Battle Above the Clouds was waged, tourist business has thrived from the building of its first toll road (Whiteside Pike) in 1857 to present day.
More than 75,000 tourists a year were visiting the site when the war interceded. Tourism was not…
Read More
The Belle of Louisville, built in 1914, is the oldest operating “western rivers” steamboat. It has the shallow-draft flat-bottom hull braced by hog-chain trusses, multiple fire-tube boilers, paddlewheel propulsion, and superstructure configuration that were characteristic of hundreds of steamboats… Read More
Designed and constructed in the early 1940s, this laboratory has an unequalled capacity to simulate a wide range of climatic conditions from arctic cold to jungle moisture. Data from tests of some three hundred different aircraft and over two thousand items of equipment has provided information…
Read More
The Old Mill, a smock type of windmill, believed to be the oldest operating windmill in the United States. Most of its parts are original. This mill is the sole survivor of four that once stood along the range of hills west of the town of Nantucket. The long spar and wheel rotate the top of the…
Read More
This pump, designed by Edwin Reynolds (1831-1909) and built by the Edward P. Allis company, is the major component of one of the earliest water-pollution control systems. It was capable of pumping more than a half billion gallons of water a day, the highest-capacity pump in the world when…
Read More
When Ford Motor Company introduced its new Model T on October 1, 1908, even an inveterate optimist like Henry Ford (1863-1947) could not predict the vast changes that his rather homely new vehicle would produce. What flowed from this series of bold innovations was more than an endless stream of…
Read More