Skip to main content

1930-1939

Rogue River Bridge
Society: ASCE Main Category: Civil Sub Category: Bridges Era: 1930-1939 DateCreated: 1931 Rogue River Gold Beach State: OR Zip: 97444 Country: USA Website: http://www.asce.org/Project/Rogue-River-Bridge/ Creator: McCullough, Conde

The Rogue River Bridge was the most advanced concrete bridge in America when it was built. Distinguished bridge engineer Conde McCullough employed the techniques of Frenchman Eugene Freyssinet to create thin, graceful concrete arches for this seven-span structure.

Pre-compression of the concrete arch was achieved and, as a result of its success, pre-stressing became one of the hallmarks of American bridge building techniques.

YearAdded:
1982
Image Credit: Courtesy Flickr/Bruce Fingerhood (CC BY 2.0) Image Caption: Rogue River Bridge Era_date_from: 1931
Kavanagh Building
Society: ASCE Main Category: Civil Sub Category: Buildings Era: 1930-1939 DateCreated: 1936 Kavanagh Bldg Buenos Aires State: Zip: Country: Argentina Website: http://www.asce.org/Project/Kavanagh-Building/ Creator: Sánchez, Gregorio , Lagos, Ernesto

Built during the 1930s, when Argentina's economy was the tenth strongest in the world, the Kavanagh Building was one of the world's first reinforced concrete skyscrapers and for many years remained the tallest building in South America. Commissioned by Corina Kavanagh and designed by architect Sanchez Lago y De la Torre, the 31-story modernist structure juxtaposes five volumes in a triangular, stair-like configuration that served for many years as a representative symbol of modern Buenos Aires.

YearAdded:
1994
Image Credit: Courtesy Flickr/Alex Proimos (CC BY 2.0) Image Caption: Kavanagh Building Era_date_from: 1936
Hoover Dam
Society: ASCE Main Category: Civil Sub Category: Dams Era: 1930-1939 DateCreated: 1935 Colorado River Boulder City State: AZ Zip: 86443 Country: USA Website: http://www.asce.org/Project/Hoover-Dam/ Creator: Six Companies, Inc., Davis, Arthur

In 1918, the U.S. Reclamation Service's director and chief engineer Arthur P. Davis proposed a dam of unprecedented height to control the devastating floods on the Colorado River, generate hydroelectric power, and store the river's ample waters for irrigation and other uses.

YearAdded:
1984
Image Credit: Courtesy of Flickr/JoshBerglund19 (CC BY 2.0) Image Caption: Hoover Dam Era_date_from: 1935
Golden Gate Bridge
Society: ASCE Main Category: Civil Sub Category: Bridges Era: 1930-1939 DateCreated: 1937 Golden Gate National Recreation Area Mill Valley State: CA Zip: 94941 Country: USA Website: http://www.asce.org/Project/Golden-Gate-Bridge/ Creator: Ellis, Charles , Strauss, Joseph

Put in service in 1937, this world-renowned bridge, conceived by Joseph Strauss and designed largely by Charles Ellis, was the longest single span (4,200 feet) in the world for a quarter century.

As with many civil engineering projects in their conceptual stages, naysayers scoffed at the Golden Gate Bridge. They said it would be technically unfeasible or too expensive to bridge the Golden Gate, a 1.7-mile-wide opening separating the Pacific Ocean from the San Francisco Bay. They said that the channel was too deep; the tides and winds too strong; the span too long.

YearAdded:
1984
Image Credit: Courtesy Flickr/Salim Virji (CC BY-SA 2.0) Image Caption: Golden Gate Bridge Era_date_from: 1937
Going-to-the-Sun Road
Society: ASCE Main Category: Civil Sub Category: Roads & Rails Era: 1930-1939 DateCreated: 1932 Going-To-The-Sun Rd West Glacier State: MT Zip: 59936 Country: USA Website: http://www.asce.org/project/going--to-the-sun-road/ Creator: Goodwin, George , Vint, Thomas Chalmers

Considered one of the world's most scenic mountain drives, the two-lane Going-To-The-Sun Road through Glacier National Park was the first major road to be constructed directly over high mountain terrain, proving that roads did not need to be limited to mountain passes.

YearAdded:
1985
Image Credit: Original Image: Flickr/Katie Brady Image Caption: Going-to-the-Sun Road Era_date_from: 1932
Society: ASME Main Category: Mechanical Sub Category: Manufacturing Era: 1930-1939 DateCreated: 1930 ABB Combustion Engineering Chattanooga State: TN Zip: 37402 Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-m-z/manufacturing---1/-44-fusion-welded-test-boiler-drum-%281930%29 Creator: Combustion Engineering Inc., Moses, A. J.
This fusion-welded drum, tested during 1930, was the first in a series tested at Combustion Engineering Inc. that led to the industrial acceptance of welding for the fabrication of boiler drums. Replacing riveting for steam power plants, electric arc fusion welding permitted increased efficiencies through higher working pressures and temperatures and fabrication of larger units of improved safety. Welding was then rapidly extended to fabrication using optimum alloys for pressure vessel and structural application. Papers published by A. J.
YearAdded:
1980
Image Credit: Image source: Engrailhistory.info Image Caption: Fusion-welded Test Boiler Drum Era_date_from: 1930
Eglin Air Force Base
Society: AIAA Main Category: Aerospace & Aviation Sub Category: Aviation Era: 1930-1939 DateCreated: 1935 Northwest Florida Regional Airport (VPS) Valparaiso State: FL Zip: 32580 Country: USA Website: https://info.aiaa.org/AIAANews/Lists/AIAA%20News/DispForm.aspx?ID=76 Creator: U.S. Army Air Corps

Established in 1935 as the Valparaiso Bombing and Gunnery Base, the base supported the U.S. Army Air Corps, the predecessor to the U.S. Air Force, as its primary facility for training new pilots in bombing and gunnery tactics. It also served as a test facility for aircraft, aircraft armament, air-delivered munitions and other aircraft systems. The base was renamed Eglin Field in 1937 in honor of Air Corps aviator Lt. Col. Frederick I. Eglin, who trained pilots during World War I, and who had recently died in an aircraft accident. After Congress created the U.S.

YearAdded:
2009
Image Credit: Public Domain (National Park Service) Image Caption: Eglin Air Force Base Era_date_from: 1935
Dunlap's Creek Bridge
Society: ASCE Main Category: Civil Sub Category: Bridges Era: 1930-1939 DateCreated: 1939 Dunlap's Creek Brownsville State: PA Zip: 15417 Country: USA Website: http://www.asce.org/Project/Dunlap-s-Creek-Bridge/ Creator: Delafield, Richard , U.S. Army Corps of Engineers

Not only was Dunlap's Creek Bridge the first cast-iron bridge in America, it was the first metal bridge anywhere to use what its builder, Capt. Richard Delafield, U.S. Army Corps of Engineers, described as "standardized, interchangeable, manufactured parts." The bridge was built as part of the federal government's effort to make repairs on the National Road  before handing authority over to the states. Dunlap's Creek at Brownsville was an especially troublesome crossing, having destroyed three previous bridges since 1801.

YearAdded:
1978
Image Credit: Public Domain (National Park Service) Image Caption: Dunlap's Creek Bridge Era_date_from: 1939
Detroit-Windsor Tunnel
Society: ASCE Main Category: Civil Sub Category: Tunnels Era: 1930-1939 DateCreated: 1930 -Windsor Tunnel Detroit State: MI Zip: 48226 Country: USA Website: http://www.asce.org/project/Detroit-Windsor-Tunnel/ Creator: Value, Burnside, Thoresen, Søren Anton

The Detroit-Windsor Tunnel is a 5,160-foot structure that carries traffic under the Detroit River between Detroit, Michigan and Ontario, Canada. Privately financed, built, and owned, it was completed in 26 months, 10 months ahead of schedule. 

YearAdded:
1982
Image Credit: Courtesy Flickr/Brian Rawson-Ketchum (CC BY-SA 2.0) Image Caption: Detroit-Windsor Tunnel Era_date_from: 1930
Society: ASME Main Category: Mechanical Sub Category: Research and Development Era: 1930-1939 DateCreated: 1939 Taylor Blvd
B
Bethesda State: MD Zip: 20817 Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-m-z/research-and-development/-197-david-taylor-model-basin-%281939%29 Creator: Taylor, David
The David Taylor Model Basin is among the largest facilities of its kind in the world, containing a shallow water basin, a deep water basin and a high-speed basin. Using its sophisticated combination of towing carriages, wave makers, and measuring equipment, engineers are able to determine the sea-keeping qualities and propulsion characteristics of ship and craft models up to 40 feet in length. Since it became operational, the facility has provided key support in the development of naval architecture for the Navy, the Coast Guard, the Maritime Administration, and the maritime industry.
YearAdded:
1998
Image Credit: Public Domain (United States Navy) Image Caption: David Taylor Model Basin Era_date_from: 1939
Subscribe to 1930-1939

We hope you enjoyed this essay.

Please support America's only magazine of the history of engineering and innovation, and the volunteers that sustain it with a donation to Invention & Technology.

Donate

Stay informed - subscribe to our newsletter.
The subscriber's email address.