Skip to main content

TX

Society: ASME Main Category: Mechanical Sub Category: Minerals Extraction & Refining Era: 1920-1929 DateCreated: 1922 Cameron World Headquarters Houston State: TX Zip: 77041 Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-m-z/minerals-extraction-and-refining/-227-first-ram-type-blowout-preventer-%28bop%29-%281922%29 Creator: Abercrombie, James, Cameron, Harry
This mechanism allowed the manual closing of a well, saved lives and prevented surface oil accumulation at drilling sites, quickly becoming an industry standard. In the early days of oilfield operations, there was no way to control the underground pressures encountered during drilling. When an oil or gas reservoir was tapped, wells were allowed to "blow out" until pressure was reduced sufficiently to allow capping. Many inventors attempted to develop a device to control such blowouts. In 1922, oil wildcatter James Smither Abercrombie (1891-1975) and machinist Harry S.
YearAdded:
2003
Image Credit: Original Image: Flickr/Ed Schipul (CC BY-SA 2.0) Image Caption: A modern Blowout Preventer (BOP) Era_date_from: 1922
Newell Shredder
Society: ASME Main Category: Mechanical Sub Category: Solid Waste Era: 1960-1969 DateCreated: 1969 Newell Industries San Antonio State: TX Zip: Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-m-z/solid-waste/-179-newell-shredder-%281969%29, https://www.asme.org/getmedia/2c664309-172d-48d9-a822-5327e310a107/179-Newell-Shredder-1969.aspx Creator: Newell, Alton

This machine, designed by Alton S. Newell, efficiently reduced automobile bodies into scrap metal for recycling. A body was fed into the shredder at a controlled rate, and rotating hammers, driven by a 500-hp motor, shredded it into small pieces that were easily shipped. The process took about 10 minutes a car and used less energy than other shredding and crushing machines. 

YearAdded:
1994
Image Credit: Image Caption: Newell Shredder Era_date_from: 1969
Hughes Two-Cone Drill Bit
Society: ASME Main Category: Mechanical Sub Category: Minerals Extraction & Refining Era: 1900-1909 DateCreated: 1909 Baker Hughes The Woodlands State: TX Zip: 77380 Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-m-z/minerals-extraction-and-refining/-246-hughes-two-cone-drill-bit-%281909%29, http://files.asme.org/MEMagazine/Web/20779.pdf Creator: Hughes Sr., Howard Robard

Prior to 1909 the traditional fishtail bit scraped the rock and quickly dulled in service. The Hughes two-cone bit's revolutionary rolling action crushed hard-rock formations with twin cone-shaped, hardened steel bits, each with 166 cutting edges, revolving on bronze bearings shaped to provide a large surface with reduced friction.

YearAdded:
2009
Image Credit: Courtesy ASME Image Caption: Hughes Two-Cone Drill Bit Era_date_from: 1909
Houston Ship Channel
Society: ASCE Main Category: Civil Sub Category: Water Transportation Era: 1830-1839 DateCreated: 1837 Baytown Houston State: TX Zip: Country: USA Website: https://www.asce.org/project/houston-ship-channel/ Creator:

The 50-mile Houston Ship Channel is a manmade port for ocean-going vessels, stretching from the Gulf of Mexico to Houston and Harris County, Texas.   

YearAdded:
1987
Image Credit: Courtesy Flickr/Roy Luck (CC BY 2.0) Image Caption: Houston Ship Channel Era_date_from: 1837
Houston Municipal Airport Terminal
Society: AIAA Main Category: Aerospace & Aviation Sub Category: Aviation Era: 1940-1949 DateCreated: 1940 William P. Hobby Airport Houston State: TX Zip: 77061 Country: USA Website: http://www.aiaahouston.org/wp-content/uploads/2012/07/Horizons_2013_01_and_02_pg_26_The_1940_Air_Terminal.pdf Creator: Finger, Joseph , Works Progress Administration

The terminal, designed by noted architect Joseph Finger and built by the Works Progress Administration, is a rare remaining example of classic art deco airport architecture, featuring the distinctive design elements of that age: step forms, sweeping curves, and intricate geometrical patterns and motifs. Opened on September 28, 1940, the terminal was Houston’s gateway to the world, and served the fleets of Braniff Airlines and Eastern Air Lines.

YearAdded:
2009
Image Credit: Courtesy Wikipedia/Mlickliter (CC BY-SA 3.0) Image Caption: Houston Municipal Airport Terminal Era_date_from: 1940
Victoria Dutch Windmill
Society: ASME Main Category: Mechanical Sub Category: Wind Power Production Era: 1940-1949 DateCreated: 1944 Memorial Park Victoria State: TX Zip: 77901 Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-m-z/wind-power-production/-151-victoria-dutch-windmill-%281840s%29, https://www.asme.org/getmedia/34e19ef6-403f-4bb4-8a57-92c17d01716e/151-Victoria-Dutch-Windmill-1840s.aspx Creator: Meiss, Fred , Fiek, Otto

This is an old technology brought here by new immigrants. It represents the beginning of modern life in a hard wilderness. This wind-powered gristmill was built in 1870 by Fred Meiss, Jr., and Otto Fiek near Spring Creek, from parts of the first windmill in the new state of Texas, erected by E.G. Witte. The millstones are the ones Witte imported from Europe and are believed to be one of the earliest sets in the United States to survive.

YearAdded:
1991
Image Credit: Courtesy Wikipedia/Larry D. Moore (CC BY-SA 3.0) Image Caption: German Rocket Era_date_from: 1944
Greens Bayou Generator Plant
Society: ASME Main Category: Electric, Mechanical Sub Category: Steam Era: 1940-1949 DateCreated: 1949 13300 West Bellfort Avenue Houston State: TX Zip: 77099 Country: USA Website: https://www.asme.org/about-asme/who-we-are/engineering-history/landmarks/154-greens-bayou-generator-plant Creator: Sinton, Walton

On April 21, 1949, a completely outdoor turbine-generator was placed into commercial operation at the Greens Bayou electric power plant--the first fully outdoor unit to operate in the United States. The demand for unprecedented quantities of electricity after World War II pressed utilities to provide addition power quickly. The outdoor design, unlike the traditional large turbine hall, resulted in significant reductions in the cost per kilowatt to build the plant.

YearAdded:
1991
Image Credit: Courtesy ASME Image Caption: Greens Bayou Generator Plant Era_date_from: 1949
Galveston Seawall and Grade Raising
Society: ASCE Main Category: Civil Sub Category: Water Supply & Control Era: 1910-1919 DateCreated: 1911 Galveston State: TX Zip: Country: USA Website: http://www.asce.org/project/galveston-seawall-and-grade-raising-project/ Creator: Noble, Alfred, J.M. O'Rourke and Company

Galveston Island is a barrier island located two miles off the Texas coast. The island is about 3 miles wide at its widest and about 28 miles long. The Galveston Seawall extends over 10 miles along Galveston's oceanfront, protecting life and property against hurricanes and tropical storms. 

YearAdded:
2001
Image Credit: Courtesy Flickr/Ed Schipul (CC BY-SA 2.0) Image Caption: Galveston Seawall and Grade Raising Era_date_from: 1911
Discovery of Fullerenes
Society: ACS Main Category: Chemical Sub Category: Frontiers of Knowledge Era: 1980-1989 DateCreated: 1985 Rice University Houston State: TX Zip: 77005 Country: USA Website: https://www.acs.org/content/acs/en/education/whatischemistry/landmarks/fullerenes.html Creator: Curl, Robert , Kroto, Harold

In early September 1985, a team of scientists discovered a previously unknown pure carbon molecule, C60, which they dubbed buckminsterfullerene. The name was chosen because the geodesic domes of Buckminster Fuller provided a clue that the molecule’s atoms might be arranged in the form of a hollow cage. The structure, a truncated icosahedron with 32 faces, 12 pentagonal and 20 hexagonal, has the shape of a soccer ball.

YearAdded:
2010
Image Credit: Courtesy Wikipedia/Itamblyn (CC BY-SA 3.0) Image Caption: Buckminsterfullerene C60 is an example of a structure in the fullerene family. Era_date_from: 1985
Society: ASME Main Category: Mechanical Sub Category: Research and Development Era: 1990-1999 DateCreated: 1996 DLP(r) Demo Center Plano State: TX Zip: 75023 Country: USA Website: http://www.asme.org/about-asme/history/landmarks/topics-m-z/research-and-development/--243-digital-micromirror-device-%281996%29 Creator: Hornbeck, Larry , Texas Instruments
The Digital Micromirror Device (DMD) was recognized as an ASME Mechanical Engineering Historic Landmark in 2008. Its development began in 1977 with the forming of a small team at Texas Instruments headed by noted physicist Larry Hornbeck. Texas Instruments was given a project from the Department of Defense to create a device that could modulate light.
YearAdded:
2008
Image Credit: Courtesy Wikipedia/Adpowers (CC BY-SA 1.0) Image Caption: Picture of DLP chip used in a digital projector at the Cinerama in Seattle Era_date_from: 1996
Subscribe to TX

Innovations

International Boundary Marker #1

William Emory was an 1831 graduate of the U.S. Military Academy at West Point. When the Mexican War broke out, he was assigned as chief engineer officer to General Stephen Kearny, whose army traversed largely unknown territories in the West. The U.S. War Department would later print 10,000…

Read More
San Antonio River Walk & Flood Control System

San Antonio's River Walk, a catalyst for abundant commercial and tourism enterprise, is generally regarded by cities and urban planners throughout the world as a prototype for the development of urban riverfront sites. The River Walk's success, however, would not have been possible without a…

Read More
Texas Commerce Bank Building

The tower was designed to rest on a continuous reinforced concrete mat, 4 feet thick, with the base of the slab 24 feet below street level.

What makes the Texas Commerce Bank Building revolutionary in the civil engineering world is not so much the building itself, but its foundation. …

Read More
First Semiconductor Integrated Circuit (IC)

On 12 September 1958, Jack S. Kilby demonstrated the first working integrated circuit to managers at Texas Instruments. This was the first time electronic components were integrated onto a single substrate. This seminal device consisted of a phase shift oscillator circuit on a tiny bar of…

Read More
LeTourneau "Mountain Mover" Scraper

 When Robert G. LeTourneau started moving earth in 1919, he thought that land leveling should require only one man. In 1920, by installing a generator and electric motors, R.G. was able to control the scraper blade from the tractor seat while driving the tractor.

 In June 1922,…

Read More
Hobby 1940 Air Terminal

The 1940 Air Terminal is a beautiful and rare example of classic art deco airport architecture from the golden age of flight. Designed by noted architect Joseph Finger, the Terminal was built to meet Houston’s growing role as a major center for air commerce in the 1930s. Its grand…

Read More
“Slanted oil wells are the latest sensation of the oil industry,” reports May 1934 Popular Science Monthly article.

H. John Eastman introduces controlled directional drilling in 1929 and was awarded a patent the following year.

The technique became widely adopted after an oil strike in Conroe, Texas, caught fire in January 1933. The well exploded, creating a 600-foot deep crater, and the oil burned…

Read More
Scoates Hall, TAM

Scoates Hall 1932 A Historic Landmark of Agricultural Engineering Named for Daniels Scoates Designer of this Building Professor and Head Department of Agricultural Engineering 1919 to 1939 Eleventh President of ASAE Teacher, Writer, Engineer Counselor to Youth, His Example Still Inspires.…

Read More

We hope you enjoyed this essay.

Please support America's only magazine of the history of engineering and innovation, and the volunteers that sustain it with a donation to Invention & Technology.

Donate

Stay informed - subscribe to our newsletter.
The subscriber's email address.